20 July 2011, 16:23
Uit Vadis:
Integral vacuum tank
The vacuum tank is mounted on the heater housing, between the servomotor and evaporator.
The electrical vacuum pump previously installed in the engine compartment has been discontinued.
Ordinary engine vacuum is now sufficient since the system is electronically controlled and vacuum is only needed in the four vacuum bells used to operate the shutters. The solenoid valves open and close to control the vacuum in the vacuum bells.
Vacuum functions
1.Floor/defroster shutter
2.Biâlevel shutter
3.Ventilation shutter
4.Recirculation shutter
5.Water valve
6.Vacuum tank
7.Firewall penetration
8.Interior temperature sensor
9.Intake manifold
10.Check valves
![[Afbeelding: vacuumsysteem940.png]](http://img830.imageshack.us/img830/9581/vacuumsysteem940.png)
Integral vacuum tank
The vacuum tank is mounted on the heater housing, between the servomotor and evaporator.
The electrical vacuum pump previously installed in the engine compartment has been discontinued.
Ordinary engine vacuum is now sufficient since the system is electronically controlled and vacuum is only needed in the four vacuum bells used to operate the shutters. The solenoid valves open and close to control the vacuum in the vacuum bells.
Vacuum functions
1.Floor/defroster shutter
2.Biâlevel shutter
3.Ventilation shutter
4.Recirculation shutter
5.Water valve
6.Vacuum tank
7.Firewall penetration
8.Interior temperature sensor
9.Intake manifold
10.Check valves
